Saturday, August 15, 2009

Poorly installed heat pumps spark deluge of complaints


This is from an article in the New Zealand Herald...

Heating and air conditioning engineers say their professional lobby has been deluged with complaints over poorly performing heat pumps, but they can do little to help most victims.

"The issues being raised include quality of installation, building code compliance, the installed solution not performing to expectations and significant power bill increases," said Steve Coatham, general manager of NZ Hevac Ltd.

New Zealand? This sounds sorta familiar. Did Bubba move to New Zealand?

"Our understanding is that many installers do not have... specialist refrigeration, air conditioning, ventilation system skills or provide electrical certification," he said.

A heat pump with less than a full charge of refrigerant could increase power consumption by over 100 per cent of expected levels, he said.

"Poor heat pump installs bring the industry into disrepute with consumers," Mr Coatham said.

I guess the dregs of the industry plague legitimate companies everywhere in the world.

5 comments:

  1. Actually, the market is stuffed with variety of heating equipments for residential applications and commercial/institutional buildings, but there are two types of appliances which can stand head and shoulder above other pumps in terms of efficiency, performance, technology, cost effectiveness.

    NYC Ac duct cleaning

    ReplyDelete
  2. Dryers are now the largest energy-consuming standard appliance in most U.S. homes, and they account for 6% of residential electricity use, according to the U.S. http://www.hausblick.de/forum/index.php?option=com_forum&view=posts&threadID=550&postID=2053#post2053

    ReplyDelete
  3. Its good to have a company who offered reasonable prices and can do proper work but sadly there few of them.

    ReplyDelete
  4. Keep the radiator control valve either all the way open or all the way closed. Again, the control valve has a knob and is connected to the incoming pipe supplying the radiator, usually near the floor. It's designed as a shutoff valve, not something that you adjust to raise or lower the amount of steam the radiator receives.

    ReplyDelete